Fenix HM61R Amber V3.0
Fenix HM61R Amber V3.0
The Fenix HM61R Amber V3.0 is a special edition headtorch adapted for the Czech and Slovak markets. It offers a spotlight with a neutral white light, a floodlight with a wide beam and high colour rendering (CRI >90), and a red light including a distinct flashing mode, which can be used as a safety light for a bicycle. It has a total of 12 modes and, in its most economical setting, can last up to 400 hours. The Fenix HM61R Amber V3.0 torch can be removed from its headband holder, clipped to a pocket or strap with its steel clip, or attached to a metal surface using its magnetic end cap. The perforated 35mm wide headband wicks away sweat, and its reflective elements increase visibility.
1,800lm
Luminous flux
195m
Maximum beam distance
Rechargeable Battery
Power source
Metal
Material
Key Features of the Fenix HM61R Amber V3.0 Headtorch
- The Fenix HM61R Amber V3.0 headtorch provides a luminous flux of up to 1,800lm and a beam distance of 195m
- Spotlight, floodlight, and red light offer a total of 12 modes
- The most economical mode allows for up to 400 hours of runtime
- Li-Ion 18650 rechargeable battery with a 4,000mAh capacity
- Charging takes approximately 2.5 hours directly in the headtorch via USB-C
- Proximity sensor automatically reduces output when shining on a nearby object
- Memory stores the last used mode for each reflector, except for Turbo mode
- The large button can be operated comfortably even when wearing gloves
- A magnetic end cap and steel clip expand the torch's mounting options
- The Fenix HM61R Amber V3.0's aluminium body with an IP68 rating is resistant to water, dust, and falls from a height of 2 metres
Power for Long Operation and USB-C Charging
The HM61R Amber V3.0 headtorch is powered by a Fenix ARB-L18-4000 Li-Ion rechargeable battery (type 18650) with a capacity of 4,000mAh. A full charge via USB-C takes approximately 2.5 hours when using a power source with at least 5V/2A. The indicator shines red during charging and turns green upon completion. The torch can be used during this time, but charging will be prolonged and available modes will depend on the current capacity. The indicator LED activates when the torch is switched on or when the button is pressed in the off state. Both the indicator and the low voltage warning are designed only for the 18650 battery. RCR123A rechargeable batteries can also be used in an emergency, or disposable CR123A batteries, but these cells must not be charged in the headtorch.
Proximity Sensor Protects the Headtorch and Illuminated Objects
If the activated spotlight comes within 6cm of an object, the safety sensor automatically reduces the luminous flux to 30lm. This limits heat build-up and the risk of damaging the illuminated object. After moving away for more than 0.8 seconds, the previous output level is restored. This feature can be enabled or disabled by pressing and holding the button for 6 seconds while the torch is off.
Aluminium Headtorch Resists Water and Impacts
The body of the Fenix HM61R Amber V3.0 headtorch is made from A6061-T6 aircraft-grade aluminium alloy, protected by a hard, scratch-resistant type III anodised finish. The IP68 rating ensures it is dustproof and waterproof when submerged to a depth of up to 2 metres for 30 minutes. The Fenix headtorch's construction withstands drops from a height of 2 metres, and its toughened glass lens is complemented by an anti-reflective coating. Digital regulation limits brightness drop-off as the battery discharges. If the temperature reaches 65°C, a protection system automatically reduces the output and allows higher modes to be used again once it cools down.
Additional Information
- Spotlight 1,800lm: runtime 2.5 hours
- Spotlight 600lm: runtime 4 hours
- Spotlight 150lm: runtime 20.2 hours
- Spotlight 30lm: runtime 73 hours
- Floodlight 200lm: runtime 5.6 hours
- Floodlight 30lm: runtime 43.5 hours
- Floodlight 10lm: runtime 136 hours
- Floodlight 2lm: runtime 400 hours
- Red light 70lm: runtime 5.7 hours
- Red light 15lm: runtime 53 hours
- Red light 3lm: runtime 222 hours
- Red flashing: 15lm
- Spotlight: LED Luminus SST-40 Gen2, beam distance 195m and intensity 9,680cd
- Floodlight: LED OSRAM 1414 CRI90, beam distance 32m and intensity 253cd
- Red light: LED OSRAM 1414, beam distance 17m and intensity 70cd
- Dimensions including bracket: 105.4 × 38 × 50.95mm
Accessories
- Fenix HM61R Amber V3.0 headlamp
- Fenix ARB-L18-4000 Li-Ion rechargeable battery
- USB-C charging cable
- Spare O-ring
- Available for purchase: spare strap, Fenix AFH-05 strap with wheel length adjustment, Fenix APB-20 and APB-30 cases, Twofish Bikeblock, Lockblocks and Fenix ALB-10 handlebar mounts, Fenix ALG-03 and ALG-04 helmet mounts and USB adapters for the mains or car
Luminous Flux
Measured in Lumens (lm), the higher the value, the more intensely the headlamp shines. Some LED headlamps offer multiple light intensity levels, adjustable either in steps or continuously. However, a higher luminous flux shortens the battery life.Up to 100lm – a headlamp for home use (lighting in the cellar, attic, or when repairing a car).
100–400lm – for outdoor use (night running, cycling, camping).
Over 400lm – for extreme professions and sports (rescuers, mountaineers).
Specifications
Features
Power Supply
Construction
Features
Dimensions and weight
Colour
Packaging
Type
Features
Power supply
Waterproof
Special features
Dimensions
Colour
Packaging
| Code: | SPTfen123 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
ARIGA s.r.o., Holečkova 2282/76, 150 00 Praha 5, Česká republika, +420 734 793 444, [email protected] 
|