AXAGON HMC-6H4A 6-in-1 Hub, USB-C 5Gbps, 4x USB-A, HDMI 4k/30Hz, PD 100W, USB-C cable 20 cm

The AXAGON HMC-6H4A 6-in-1 Hub, USB-C 5 Gb/s, 4× USB-A, HDMI 4K/30 Hz, PD 100W, USB-C cable 20cm is a very useful accessory, especially for ultrabooks that have fewer ports, bringing the benefits of a large number of additional ports and connectors. It significantly increases the usability of your laptop, helps keep your desk tidy and allows you to disconnect all your electronics in a single second. The AXAGON docking station and your laptop connect via a USB-C interface. The docking station's body is made of aluminium. Thanks to the LED indicator, you have an at-a-glance overview of important statuses. The AXAGON HMC-6H4A multiport USB-C 3.2 Gen 1 hub expands your notebook, computer or phone with six ports. You can easily and quickly connect up to four USB devices and an HDMI display to your computer at the same time via the reversible USB-C connector. At the same time, you get the ability to power your notebook using Power Delivery technology. The USB-C hub thus provides you with a simple and compact 6-in-1 docking station for your notebook. The USB hub offers four USB outputs with standard USB-A connectors. The hub can handle the permanent connection of several external drives at the same time. Thanks to the fast USB 3.2 Gen 1 interface, the hub's transfer speed is up to 5Gb/s. The USB-C connector is dedicated solely to powering and simultaneously charging phones or notebooks using Power Delivery 3.0 technology with up to 100W of power. You plug a USB-C Power Delivery charger into the hub and connect the hub to your notebook. This also frees up one USB-C port. The prerequisite is a notebook that supports charging from a USB-C port using Power Delivery and a suitable PD charger. A higher surface temperature of the hub is not a defect – the heat generated by the hub's operation is better dissipated and transferred to the surroundings.

Package contents:
USB-C hub with a fixed 20cm cable, multilingual manual
Dimensions:
110 × 35 × 12mm
Weight:
54g
USB cable length:
20cm
Input:
1× USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector
Backwards compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0
Compatible with Thunderbolt 3
Connecting USB type C male connector located on a permanently attached 20cm cable
USB outputs:
4× SuperSpeed USB port, USB-A female connector
1× USB type C Power Delivery port (charging only), USB-C female connector
Supports transfer rates of 5,000, 480, 12, 1.5Mb/s (SuperSpeed / High / Full / Low speed)
The total throughput/transfer rate is determined by the USB 3.2 Gen 1 interface used (theoretically up to 5Gbit/s)
The USB-C hub can handle connecting multiple external drives simultaneously
HDMI output:
HDMI
HDMI A (F) female connector
Maximum supported resolution 4K/4096 × 2160 at 30Hz
WQHD resolution 2560 × 1440 at 60Hz max
FullHD resolution 1920 × 1080 at 60, 100, 120Hz max
For the video output to function, the hub must be plugged into a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a USB-C port with Thunderbolt 3 support. At the same time, support from the device (notebook, phone) and operating system is required. Without this support, the video output function will not be available.
HPD (Hot-Plug-Detect) support
TMDS (Transition Minimized Differential Signalling) support
Full support for HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection)
Support for up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio formats
Supports sampling rates up to 192kHz and up to 24-bit audio – depends on the source and destination device, i.e. notebook/phone and TV/monitor/AV receiver
Power Delivery:
Power Delivery 3.0 support – pass-through charging of the device from the mains adapter via the USB-C hub
Maximum charging power via PD USB-C hub output 100W – 20V/5A
Requires PD support from the device (notebook, phone) and a suitable PD mains adapter
Supported operating systems:
Windows 10/11 and later, macOS, Linux, Chrome OS and Android
Compatibility depends on the updated operating system and support from the device manufacturer
Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed.
DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated operating systems and also depends on support from the device (notebook, phone).