Tenda RH3-WCAv2 Outdoor Pan/Tilt WiFi6 AI camera with LAN port

Easy and efficient management with Tenda TDSEE

Keep your IP cameras under control. Thanks to the TDSEE app, which is completely in English, you will find it easy not only to install but also to use the cameras. You can have notifications sent to you at the given times, recording when motion is detected, watch the live feed from the camera, zooming in and outtake photos or videos, set alarms (white flashing LEDs, audible warning, audio recording), night mode (Smart mode, Full colour mode, Black and white mode), Purchase Cloud Storage directly from the camera settings, babysitting mode, switching off the LED indication, turning off the camera, automatic firmware updates and more.

Design, location and durability

The camera has a clean and simple design that is also very efficient. The shooting angle is 355° horizontally and 90° vertically and there are two white LEDs around the optics and another IR LED for illumination at night and sun correction during the day. The camera is IP65 rated - designed for outdoor use, dust and water resistant. The camera is complemented by a handy wall, ceiling or mast mount for quick attachment according to the user's requirements.

High image quality and two-way audio

The RH3-WCA2 has a resolution of 3 MPx (2304 × 1296 px), then optics f4 = 4 mm and F = 1.6, infrared filter ICR, 3D noise reduction, DWDR (Digital Wide Dynamic Range), Rear light compensation, and others. It also supports two-way audio transmission (includes microphone and speaker), which makes it possible to communicate remotely. The camera can also play an audio alert from the camera speaker. The speaker can also be used as a siren when motion is detected.

Motion detection, auto-rotation and alarm functions

The camera detects motion and automatically rotates to the side on which the object was last viewed. This function can be used to set the alarm behaviour - white flashing LED alert, sound alert, wake siren or recorded 10 second sound recording (up to 3 recordings). It can also be left silent and without LED flashers. Also setup notifications to your mobile phone, record when motion/person is detected, etc. The RH3-WCA2 includes LEDs for nighttime illumination. Two white LEDs and two more IR LEDs for illumination at night and sun correction during the day. There are several night vision modes to choose from (Smart mode, Full colour, Black and White mode). You can leave the night vision mode on, off or the camera will activate and deactivate it automatically.

Custom audio recording and data storage

The RH3-WCA2 can also play back a 10-second message recorded by you directly when motion is detected. You can save a total of three of these messages and choose which one to use. For example. when you enter your house, there may be a recording of "Hello, we know about you." Or, conversely, to scare off unwanted visitors, it may say "Leave the premises immediately or the police will be contacted". The camera stores data in internal or Cloud storage. The internal storage consists of a microSD card slot with a maximum capacity of 512 GB. Such can be directly stored in the paid version of the remote cloud storage. It is located in Europe and has higher security than conventional cameras. The cloud storage is European and complies with ISO/IEC 27018 data protection standards. Data is encrypted with special encryption using AES 256-bit encryption.

Package contents:
Tenda RH3-WCAv2, Power adapter 12 V DC / 1 A (3 m cable), wall/ceiling mount, attachment kit, kit for waterproof connector connection, quick installation guide
Technical Specifications:
Wi-Fi standards: IEEE 802.11 b/g/n/ax (2.4 GHz)
Ethernet: 1× LAN RJ45 port 10/100 Mbps
Resolution: 3 MPx (2 304 × 1 296 px)
Angle of view: 355° horizontally, 90° vertically
Security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
Control: Tenda TDSEE mobile app
Voice assistant support: Amazon Alexa
Interface: 1× Reset, 1× microSD slot (max. 512 GB), 1× Jack connector, 1× RJ45
LED indication: 1× red/blue
Compatibility: Android 4.4 and higher, iOS 9.0 and higher
Class of cover: IP65
Lens: 4 mm, F1.6
Audio transmission: two-way (microphone and speaker)
Alert: light and sound
Recorded messages when motion is detected: 3 messages (max. 10 seconds each)
Range of night LED/IR illumination: 30m
Antenna: 2× integrated
Compression formats: H.265, H.264
Other features: ICR, 3D Noise Reduction, DWDR, Light Compensation
Design: outdoor
Operating temperature: -30 °C to +60 °C
Dimensions: 120 × 120 × 146 mm (h × w × d)
Certification:
CE, RoHS, FCC, RCM, UKCA