QNAP ES1686dc-R2-2123IT-64G

19,349 €

QNAP ES1686dc-R2-2123IT-64G

The QNAP ES1686dc-R2-2123IT-64G network storage is designed for storing and managing large amounts of data in a corporate environment. This device can accommodate up to 16 hard drives or SSDs with a SAS 12Gb/s interface, supporting 2.5" SAS SSD, 2.5" SAS HDD, and 3.5" SAS HDD formats. The system uses two active controllers for continuous operation and high availability of business services. Redundant power supplies with a total output of 1400W provide power to both modules. The device supports virtualisation, SSD cache acceleration, and fast network connectivity via 10GbE SFP+ ports.

NAS QNAP ES1686dc-R2-2123IT-64G

Key features of the QNAP ES1686dc-R2-2123IT-64G NAS

  • 16 drive bays for SAS 12Gb/s standard hard drives
  • RAM expandable up to 524288MB
  • Two redundant power supplies with a total output of 1400W
  • A total of 14 LAN ports, including a 10GbE SFP+ interface
  • Read speed of 5773MB/s and write speed of 2201MB/s
  • Dimensions of 132 × 483 × 630.6
  • Supports RAID 0, 1, 5, 6, 10, 50, and 60 disk arrays
NAS QNAP ES1686dc-R2-2123IT-64G

Dual-processor architecture

Each of the two controllers contains a quad-core Intel Xeon D-2123IT processor with a frequency of 2.2GHz. In burst mode, the clock frequency automatically increases to 3GHz. The system distributes the computational load and processes demanding business applications in real-time without delay. The x86 architecture supports a wide range of virtualisation platforms.

NAS QNAP ES1686dc-R2-2123IT-64G

Reliable SAS interface

The 16 bays can be fitted with both 2.5" and 3.5" drives with a SAS 12Gb/s interface. Backwards compatibility allows you to connect older SAS 6Gb/s drives. The device supports fast acceleration using SSD caching to speed up both reading and writing. The hot-swap design makes it easy to replace drives during operation without having to shut down the entire system.

NAS QNAP ES1686dc-R2-2123IT-64G

Fast NAS network interface

Each controller carries four 10GbE SFP+ ports for data transfers on the corporate network. These are complemented by three gigabit RJ45 Ethernet ports, which are used for remote management, with the system supporting Wake on LAN and Jumbo Frame functions. In total, the storage offers 14 LAN ports for network connection. The measured read speed is 5773MB/s and the write speed is 2201MB/s. Four USB 3.2 Gen 1 ports are available for connecting other devices.

NAS QNAP ES1686dc-R2-2123IT-64G

Expandable RAM

In its basic configuration, the system includes 65536MB of DDR4 ECC RAM. A total of 16 R-DIMM/LR-DIMM slots can accommodate up to 1024GB of RAM, or 512GB per controller. The system administrator can easily expand the memory to meet the needs of specific applications. ECC memory detects and corrects single-bit errors, which prevents data corruption.

NAS QNAP ES1686dc-R2-2123IT-64G

Advanced data protection

The storage supports a wide range of disk arrays, including RAID 0, 1, 5, 6, 10, 50, and 60. For a high level of security for large data volumes, a combined RAID 60 array is used. The system uses the AES-NI encryption engine to protect sensitive corporate information. Files can be shared via SAMBA, HFS, CIFS, or iSCSI protocols.

NAS QNAP ES1686dc-R2-2123IT-64G

Redundant power and cooling

The entire rack is powered by redundant hot-swap power supplies with a total output of 1400W, which operate with an input voltage of 90 to 264V AC. In the event of one module failing, the other immediately takes over the entire load. The internal temperature is maintained by three fans measuring 60 × 60 × 38mm with speeds of up to 16000rpm. The typical consumption of a fully populated storage unit is 501W, and the annual energy consumption is around 4389kWh at an operating temperature of 0 to 40°C.

Package contents:
QNAP ES1686dc-R2-2123IT-64G NAS main unit, power cable, RJ-45 network cable, manual
Processor:
Intel Xeon D-2123IT
System memory (RAM):
65536MB
RAM expandable to:
524288MB
Number of drive bays (2.5" and 3.5"):
16×
Supported RAID:
RAID 0, RAID 1 (mirroring), RAID 5, RAID 6, RAID 10 (1+0), RAID 50 (5+0), RAID 60 (6+0)
Read speed:
5773MB/s
Write speed:
2201MB/s
Power supply output:
1400W
LAN:
14×

Specifications

Power outlet type

Country Czechia, Slovakia, Hungary, Germany, Russia, Austria, Croatia, France, Poland, Romania, Slovenia

Use

Use Company
Design Rack

Storage

Maximum capacity 402.65 TB
Drive configuration Disc-free
Number of drive bays (2.5" and 3.5") 16 ×
RAID supported RAID 0, RAID 1 (reflection), RAID 5, RAID 6, RAID 10 (1+0), RAID 50 (5+0), RAID 60 (6+0)

Performance

System memory (RAM) 64 GB (65,536 MB)
Memory type DDR4
RAM memory expandable to 512 GB (524,288 MB)
Number of RAM memory slots 8 ×
Number of populated memory slots 4 ×
Processor frequency 2.2 GHz
Read Speed 5,773 MB/s
Write speed 2,201 MB/s
Processor Intel Xeon D-2123IT
CPU architecture x86

Supported disks

Compatible disc type 2.5" SAS SSD, 2.5" SAS HDD, 3.5" SAS HDD

Software and services

Supported services File Sharing (SAMBA, HFS, CIFS), Cloud server, Recording from IP cameras, FTP server, Web server, Download server, iSCSI, Database server

Power Supply

Power supply type Internal
Power supply output 1,400 W

Interface

LAN 14 ×
USB 3.2 Gen 1 (USB 3.0) 4 ×
PCIe 4 ×

Features and functions

Features External storage expandability, PCIe card expansion
Functions Equalizer, SSD cache acceleration, Virtualization, Redundant power supply (RPS)
Max. operating temperature 40 °C
Minimum operating temperature 0 °C

Consumption

Typical power consumption 501 W

Dimensions and weight

Depth 630.6 mm
Height 132 mm
Width 483 mm
Weight 30.3 kg

Package contents

Package contents Main unit, Power cable, RJ-45 network cable, Manual

Warranty

Extended warranty Extended Warranty
Code:  Qnap25005
Warranty: 24 months
Links: Producer's Website:
Manufacturer information

QNAP GmbH, Karl-Arnold-Straße 26, 47877 Willich, +492154884280, [email protected]

Show more