Philips Dual Scan Series 3000i AC3059/51

Philips Dual Scan Series 3000i AC3059/51
Philips Dual Scan Series 3000i
Air Purifier with Air+ App ConnectionAC3059/51
Healthier air in your home
A home free from irritating allergens? No problem with the powerful Philips AC3059/51 Air Purifier! It features three-layer filtration – a pre-filter, an activated carbon filter, and a NanoProtect HEPA filter, which removes up to 99.97% of particles as small as 0.003 µm*, including PM2.5 dust microparticles, pollen, harmful gases**, allergens, and pet dander. The Philips Dual Scan Series 3000i AC3059/51 air purifier continuously monitors the air quality in the room and uses special sensitive sensors to evaluate pollution. In automatic mode, it adjusts its performance according to the measured values. If the automatic mode doesn't suit you, you can also regulate the performance manually. There is also an ultra-quiet night mode for undisturbed sleep. The air quality measured by the Philips Dual Scan Series 3000i AC3059/51 purifier can be monitored directly on its clear display. The level of pollution is also indicated by colour coding or in the mobile app, along with other interesting information.

Two sensors for continuous air quality scanning
High performance CADR 520m3/h
Removes particles as small as 0.003 µm*


Removes 99.97% of particles
The Philips Series 3000i purifier effectively removes 99.97% of all harmful airborne particles as small as 0.003 µm* (800× smaller than PM2.5 particles), including PM2.5 particles, pollen, dust, and pet dander. It ensures that you breathe truly healthy and clean air all year round, even during the smog season. This is thanks to its three-layer filtration, which consists of a pre-filter, an activated carbon filter, and a NanoProtect HEPA filter.

For rooms up to 62m2
The Philips Series 3000i purifier cleans up to 520m3 of air per hour, allowing it to purify the air in a room in under 6 minutes***. You'll have allergen-free, purified air in literally every corner of the room. The Philips Dual Scan Series 3000i AC3059/51 is suitable for spaces up to 62m2.

Clear display on the Philips Air Purifier
Thanks to the clear display, you will always have up-to-date information on the air quality in the room. For quick reference, a colour display of air quality is used – blue means high air quality, while red indicates heavily polluted air. You can get more detailed information about the quantity of individual pollutants from the numerical data on the display.

Intelligent Filter Status Indicator
You don't have to worry about when to change the filters. The Philips Dual Scan Series 3000i AC3059/51 Air Purifier does it all for you. Based on the actual amount of pollutants filtered and the total operating time, it calculates when it's time to replace them and alerts you.

Original Accessories
Maintain clean air and the best performance from your purifier. Ensure maximum lifespan and optimal air purification by using genuine Philips filters, which also extends the frequency of filter changes.

Extra Quiet Operation
The Philips Dual Scan Series 3000i is also suitable for use in a bedroom or nursery. In sleep mode, it cleans the air very quietly, its lights dim and can be turned off completely for your maximum comfort.

Allergy Sleep Mode
The standard sleep mode is also enhanced with a special allergy sleep mode. While maintaining a low noise level, the Philips Dual Scan Series 3000i AC3059/51 air purifier can provide up to 40% more clean air**** thanks to its effective detection of allergenic dust.

Monitor and Control via the App
Using the Air+ app, you have constant control over the air quality in your home anytime, anywhere. Through the app, you can control the fan speed, check the filter status, or compare the indoor air quality with the outdoor air quality. The app is compatible with Android and iOS and will give you up-to-date data on the amount of pollutants captured, so you will always have an overview of the air quality in the room.

Removes 99.9% of Viruses
According to independent studies, the Philips Dual Scan Series 3000i AC3059/51 air purifier can also capture aerosols that may contain respiratory viruses. The purifier has been tested by Airmid to remove up to 99.9% of viruses and aerosols from the air*****, and has also been tested for coronavirus******.
* From the air passing through the filter. Tested with NaCl aerosol using the iUTA method according to DIN71460-1
** Tested by the supplier's laboratory for single-pass efficiency of the filter medium at an air flow rate of 5.33cm/s.
*** From the air passing through the filter. Tested according to JIS B9908-2015. This is an estimated time for a single purification, calculated by dividing the CADR value of 520m3/h by the room size of 48m3 (assuming a room floor area of 20m2 and a room height of 2.4m).
**** Based on CADR measurements according to GB/T-18801/2015 with the device operating in sleep mode and allergy sleep mode.
***** Microbial Reduction Rate Test conducted at Airmid Healthgroup Ltd. in a 28.5m³ test chamber contaminated with airborne influenza A(H1N1). * An air purifier by itself does not protect against Covid-19, but can be part of a plan to protect yourself and your family (US Environmental Protection Agency)
******Microbial Reduction Rate Test conducted at an external lab, in a test chamber contaminated with avian coronavirus (IBV) aerosols, with a Philips NanoProtect HEPA filter.
Technical specifications
Functions
Air quality indicator
Numerical
Gas sensor
Yes
PM2.5 sensor
Yes
Modes
Auto, Turbo, Sleep, Allergy Sleep
Aerodynamic design
360-degree inlet
Healthy air protect alert & lock
Yes
Light sensor
Yes
Design and finishing
Control panel colour
Black
Control panel type
Touch panel
Main body material
Plastic
Decorative ring material
Plastic
Performance
Room size
Up to 62m2
CADR (Particle)
520m3/h
Ultra-fine particle removal
as small as
3nm
Filters out PM2.5
99.97%
Filters out H1N1 virus
99.9%
Filters out bacteria
99.9%
Min. sound level (Sleep mode)
15dB
Max. sound level (Turbo mode)
56dB
Energy efficiency rating
High
Integrated filter
FY3430/30
Recommended filter lifetime
36** months
Technical data
Voltage
230V
Frequency
50Hz
Cord length
1.8m
Power consumption
58W
Stand-by power consumption
2W
Weight and dimensions
Product weight
7.2kg
Dimensions (W × H × D)
295 × 657 × 295mm
Service
Specifications
Features
Functions
Filters
Dimensions and weight
| Code: | PHICV205 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Philips Consumer Lifestyle B.V., Tussendiepen 4 9206 AD Drachten Netherlands, www.philips.com/support Pernerova 702/39, 186 00 Prague 8, [email protected]
|




