Archive - Construction Site Equipment

Drill - 550 W, with hammer, speed up to 3000 RPM

Angle Grinder with power of 500W, disc diameter: 115mm, max speed: 12000 rev/min, additional handle, weight: 1,54 kg

Cordless Screwdriver 18 V, 1,5 Ah, max. spinning moment 35 Nm, includes batteries

Circular Saw - with disc, disc diameter of 210mm, cutting depth: 70/45mm

Circular Saw - with disc

Mitre saw - desktop, suitable for wood, AKU drive type, outer disc diameter 210 mm and inner disc diameter 30 mm, cutting depth 65 mm at 90°/90° angle, 65 mm at 90°/45° angle, 35...

Circular Saw - battery power,, no-load speed: 4200 RPM, cutting depth up to 54mm, saw blade diameter: 165mm, weight: 2,722kg

Power Sander

Submersible Pump application: barrel - battery-powered, designed for clean water, flow rate 2000 l/h, delivery height 20 m, power cable length 2 m, connection diameter 25 mm (1")...

Submersible Pump application: barrel - battery-powered, designed for clean water, flow rate 2000 l/h, delivery height 20 m, power cable length 2 m, connection diameter 25 mm (1")...

Cordless Drill with hammer, 18 V, maximum torque: 55 Nm, motor type: carbonless, chuck range: 13 mm, package includes 2 × 1,3 Ah batteries, with carrying case

Cordless Drill 18 V, maximum torque: 47 Nm, motor type: carbon, chuck range: 13 mm, package includes 2 × 1,3 Ah batteries, with carrying case

Cross Line Laser Level - range 15 m, for indoor use, 2 planes, levelling accuracy ± 0.3 mm/m, levelling time 4 s, self-levelling capability 4°, green laser colour, ingress...

Cross Line Laser Level - Easy balancing for fast and accurate results across a range of projects

Cordless Drill standard, 18V, two-speed, max. torque 60Nm, chuck capacity: max. 13mm, weight: 1300g

Cordless Drill without hammer, 18 V, Li-Ion, maximum torque: 40 Nm, motor type: carbonless, chuck range: 13 mm, without battery

Cordless Drill with hammer, 18 V, Li-Ion, maximum torque: 40 Nm, motor type: carbonless, chuck range: 13 mm, without battery

Circular Saw - with disc, with power of 800W, 2950RPM, disc diameter of 200mm, cutting depth: 45/27mm

Chainsaw

Heat Gun 2300 W, maximum temperature up to 650 °C, air flow 500 l/min, equipment: thermal protection and temperature regulation

Tacker manual, for buckle length 6-14 mm and 4-10 mm and width 11,3 mm, has the following characteristics: handle lock

Compressor oil-free, input power 120 W, max. pressure 2,8bar, voltage 12V

Angle Grinder , disc diameter: 125mm, max speed: 9000 rev/min, antivibration handle, weight: 2,1 kg

Mitre saw - power: 1400W, 5000 RPM, LED lighting, 216mm × 30mm, weight: 14,2kg