Endorfy Enduro L6 850W

New arrival 93.90 €

Endorfy Enduro L6 850W

The Endorfy Enduro L6 850W power supply powers mid-range systems and uses the ATX 3.1 standard. Connected components draw power directly from the PSU, reducing the need for additional adapters for modern hardware. The device operates with a continuous output of 850W and meets demanding requirements for stable power delivery. The fixed cabling design supports reliable operation of the entire system without the need for additional adapters when powering graphics cards.

Power

850W

Power
Form factor

ATX

Form factor
Certification

80 PLUS Gold

Certification
Modularity

No

Modularity
Endorfy Enduro L6 850W power supply

Key features of the Endorfy Enduro L6 850W power supply

  • Continuous 850W power output for mid-range PCs
  • Native 12V-2×6 connector powers graphics cards with up to 600W consumption
  • DC-to-DC topology maintains stable voltage on +3.3V and +5V rails
  • 120mm Stratus fan with FDB bearing cools internal components
  • Protective circuitry guards the system against overvoltage, short circuits and overheating
  • Power supply dimensions are 8.7×15×14cm (H×W×D)
info

Choosing a power supply

When choosing a suitable PC power supply, power output is a key parameter alongside the form factor. This indicates the maximum wattage that the PSU can continuously supply to the components in your computer. We recommend using an online calculator to calculate the optimum power output based on your chosen components.

ATX 3.1 standard and high performance

This power supply delivers a steady 850W output and fully supports the ATX 3.1 specification. The design handles brief spikes in power demand that commonly occur with modern processors and graphics cards. The ability to cope with sudden power surges protects the system from instability. This gives you a stable foundation for demanding, high-load systems without the worry of unexpected shutdowns.

Endorfy Enduro L6 850W power supply
Endorfy Enduro L6 850W power supply

Power supply and graphics card power

The specification includes a native 12V-2×6 connector that enables a direct connection for next-generation graphics cards. This connector can deliver up to 600W of power through a single cable without any adapters. Direct connection limits mechanical stress on the cables and simplifies the internal layout of the case. The manufacturer supplies the unit with cables capable of safely delivering high power directly to compatible PCIe 5.1 graphics cards.

High energy efficiency

The device achieves high efficiency, backed by 80 PLUS Gold and Cybenetics ETA Platinum certifications. High efficiency reduces energy conversion losses and operating costs. Lower waste heat generation helps to reduce temperatures inside the PC case and extends the lifespan of the components. This power supply minimizes energy conversion losses and optimises the overall power consumption of the system.

Endorfy Enduro L6 850W power supply
Endorfy Enduro L6 850W power supply

DC-to-DC topology

Advanced DC-to-DC topology ensures a stable power supply by maintaining constant voltage. This system provides precise regulation of the +3.3V and +5V rails regardless of the current load. Unlike older designs with group voltage regulation, it prevents fluctuations during dynamic load changes. This technical solution offers precise regulation of +3.3V and +5V rails for sensitive components.

Quiet and efficient cooling

Heat dissipation is handled by a 120mm Stratus fan with an FDB bearing. An optimised speed curve keeps operating noise levels low even under full system load. The fluid dynamic bearing (FDB) reduces friction, extending the lifespan of the fan and ensuring stable cooling performance. A specially designed fan curve maintains low operating noise levels during gaming and work tasks.

Endorfy Enduro L6 850W power supply
Endorfy Enduro L6 850W power supply

Power supply safety

Safe operation is ensured by a suite of seven protection circuits against overvoltage, undervoltage, overload, short circuits, and overheating. Gold-plated crimp contacts increase the mechanical durability and reliability of connections for power-hungry components. The system responds to power surges at startup as well as mains electricity faults. The gold-plated contacts used reduce contact resistance in the connections and prevent hardware damage.

Flat cables for easy installation

Black flat cables make it easy to organise the cabling inside the computer case and improve airflow. The package includes special clips for securing the 12V-2×6 cable without cable ties. This type of cabling takes up less space than traditional braided cables and simplifies installation. The included accessories help maintain the correct bend radius for the graphics card power cable.

Endorfy Enduro L6 850W power supply
Endorfy Enduro L6 850W power supply

Compact dimensions and design

Physical parameters comply with the ATX standard, allowing installation in standard PC cases. Fixed cabling offers sufficient length for routing behind the motherboard tray and facilitates a clean installation. The dimensions ensure compatibility with a wide range of cases. The flat black cables offer plenty of length for routing even in space-demanding computer cases.

Connectors

  • 1× ATX 24-pin
  • 2× CPU 4+4-pin
  • 3× PCI-E 6+2 pin
  • 1× 12V-2×6 16 pin
  • 5× SATA 15 pin

Package contents

  • ENDORFY Enduro L6 850W power supply
  • Power cable with EU plug
  • 4× UNC #6-32 mounting screw
  • 3× cable tie
  • Clips for 12V-2×6 cable for tidy cable routing
  • User manual
info

80 Plus certification in the European market

The 80 Plus certification was created to objectively evaluate the efficiency of computer power supplies. This gives users a simple and clear comparison of individual models. In the European market (where 230V voltage is used), there are six levels of 80 Plus certification with specified requirements for computer power supplies. Higher energy efficiency primarily means lower power consumption.

PC power supply loadEfficiency at 20% loadEfficiency at 50% loadEfficiency at 100% load
80 PLUS82%85%82%
80 PLUS Bronze85%88%85%
80 PLUS Silver87%90%87%
80 PLUS Gold90%92%89%
80 PLUS Platinum92%94%90%
80 PLUS Titanium94%96%94%

Specifications

Performance and format

Performance 850 W
Format ATX
ATX version 3.1
Modularity No

Equipment

Features and functions Thermal speed control, Power switch
Type of protection Overvoltage protection (OVP), Undervoltage protection (UVP), Overcurrent protection (OCP), Over-power protection (OPP), Short-circuit protection (SCP), Over-temperature protection (OTP)

Efficiency

Certification 80 PLUS Gold

Connectors

Connectors ATX 24pin, CPU 8pin / 4+4pin, Molex 4pin, PCI-E 8pin / 6+2pin, SATA 15pin, 12V-2x6 16pin
Number of EPS/CPU 4+4pin 2
Number of PCI Express 16-pin 1 pc(s)
PCI Express 8pin / 6+2pin 3pc(s)
Number of serial ATA 15-pin 5pc(s)
Number of molex HDD 4-pin 1pc(s)

Cooling system

Fan size 120 mm

Dimensions

Width 150 mm (15 cm)
Height 86 mm (8.6 cm)
Depth 140 mm (14 cm)
Code:  ENDzel6a06
Warranty: 84 months
Manufacturer information

COOLING sp. z o.o, úl. Sokolovská 24, 05-806 Sokołów [email protected]

Show more

Related categories

Chcete doručit zboží do Česka? Prohlédněte si Endorfy Enduro L6 850 W
Chcete doručiť tovar na Slovensko? Prezrite si Endorfy Enduro L6 850 W
Für Versand nach Österreich, besuchen Sie bitte Endorfy Enduro L6 850 W
Magyarországra történő kiszállításért tekintse meg ezt a termékoldalt: Endorfy Enduro L6, 850W