DeepCool FD12 V2 (3 IN 1)
DeepCool FD12 V2 (3 IN 1)
The pack contains three 120mm fans to draw heat away from your PC's key components. For example, you can use a pair of fans to draw in cooler ambient air and one to exhaust the heated air. This lets you use the set's full potential and create a balanced airflow in your PC case. High airflow of 79.89 CFM and a wide speed range of 500 to 2500RPM also contribute to its efficiency. The fans in the DeepCool FD12 V2 3-in-1 set are compatible with almost all standard PC cases and water coolers. A universal 4-pin PWM connector provides the connection to the motherboard.
Key features of the DeepCool FD12 V2 3-in-1 fan set
- DeepCool FD12 V2 3-in-1 is a set containing three 120mm PC fans
- Hydro-Dynamic Bearings (HDB) ensure quiet operation
- PWM regulates the speed in the range of 500 to 2500RPM
- The airflow of a single fan reaches 79.89 CFM
- Maximum noise level of the DeepCool FD12 V2 3-in-1 does not exceed 35.66dB(A)
- All fans can be connected to a single connector
- Powered by a standard 4-pin PWM connector
Quiet operation with HDB bearings
The DeepCool FD12 V2 3-in-1 dynamically adjusts its performance based on the values measured by the temperature sensors in the PC. An automatic PWM signal command regulates the fan speed to be exactly as high as the PC needs it at any given moment. The DeepCool FD12 V2 3-in-1 fan set lets you connect the individual fans in series. This means you can have all 3 connected while only occupying a single connector on the motherboard. The basis for quiet and reliable operation is the use of hydro-dynamic bearings (HDB). These use a thin layer of fluid to reduce friction and wear on moving parts. The result is low operating noise even at maximum speed. The noise level of the fans from the DeepCool FD12 V2 3-in-1 set remains below 35.66dB(A).
Specifications
Backlight
Fan speed
Technical specification
Dimensions
Pack
Connectors
Weight
| Code: | DECOf12v2a |
| Warranty: | 36 months |
| Links: | Producer's Website: |