Creality SpacePi X4
Creality SpacePi X4
The Creality SpacePi X4 is a powerful filament dryer designed to prepare up to four spools simultaneously. Its two independently controlled chambers allow you to dry different types of materials at different temperatures, with a range of 45–85°C that accommodates even more demanding technical filaments. Uniform drying is ensured by 360° hot air circulation, active moisture removal, and automatic regeneration of the integrated desiccant. A clear 3.2" touchscreen provides easy control, and thanks to the filament outlets, you can feed the material directly to the printer while it's drying.
Key features of the Creality SpacePi X4 3D printer accessory
- Creality SpacePi X4 filament dryer for up to 4 spools simultaneously
- Two independent drying chambers with individual temperature settings
- Adjustable temperature from 45–85°C and a 1–48 hour timer
- Dual 200W PTC heating elements for fast and efficient heating
- 360° hot air circulation for uniform drying
- Active dehumidification with two fans to remove moisture from the chambers
- Integrated desiccant with automatic regeneration during operation
- Sealed design and one-way valves help prevent moisture from re-entering
- 3.2" touchscreen with automatic modes and custom presets
- Auto Silent mode automatically reduces fan speed once the target temperature is reached
- Option to operate just one chamber for lower energy consumption
- Supports 1kg and 2kg spools and filaments with a diameter of 1.75/2.85mm
- Suitable for PLA, PETG, TPU, ABS, ASA, PET, PA, PAHT, PC and other filaments
Up to four spools ready for printing
The Creality SpacePi X4 holds up to four filament spools at once, making it ideal for multicolour printing or working with several materials. You can feed the filament directly to the printer while it dries, keeping it in optimal condition throughout the print. The design supports standard 1.75mm and 2.85mm filaments and spools up to 200mm in diameter.
Two independent chambers for different materials
The interior is divided into two independently controlled chambers, each using its own PTC heating element. This allows you to dry PLA in one section and a technical filament requiring a higher temperature in the other. If you only need to prepare two spools, you can use just one chamber and reduce energy consumption by up to 40%.
Temperatures up to 85°C for technical filaments
Two 200W PTC heating elements allow temperatures to reach up to 85°C. This makes the SpacePi X4 suitable not only for standard PLA, PETG or TPU, but also for materials that are more demanding to dry, such as PA, PAHT or PC. You can set the temperature from 45 to 85°C and the drying time from 1–48 hours. For any specific filament, it is always best to follow the temperature recommended by its manufacturer.
SpaceDry 4.0 for an effective fight against moisture
SpaceDry 4.0 technology combines 360° hot air circulation, active dehumidification and an integrated desiccant. A pair of fans continuously vents released moisture out of the chambers, while the circulating hot air simultaneously regenerates the desiccant automatically, so there is no need to replace it regularly. After drying is complete, the seal and one-way valve design help limit moisture from re-entering.
Uniform 360° hot air circulation
The 360° Hot Air Circulation system distributes heated air around the stored spools to dry the filament as evenly as possible. Removing excess moisture can help reduce printing problems such as stringing, poor layer adhesion or irregular extrusion.
Intuitive control on the touchscreen
On the front, you will find a 3.2" touchscreen that makes it easy to set the parameters for both chambers. There are automatic modes based on material type and a 'My Drying' function with three custom presets, so you don't have to enter frequently used settings every time.
Quieter operation after heating up
The Auto Silent function automatically reduces the fan speed once the set temperature is reached. This lets the dryer continue working with less noise, which you will appreciate during longer drying cycles. An audible alarm can notify you when the process is complete.
Safety under control
The SpacePi X4 incorporates several safety features. The system monitors the fan operation and can pause drying if they malfunction. An NTC temperature sensor monitors the outlet air temperature, and the PTC heating system has thermal protection against overheating.
Specifications
Features
| Code: | CREAU260902 |
| Warranty: | 24 months |
| Links: | Producer's Website: |