AXAGON ADR-205
AXAGON ADR-205
An active 5-metre USB 2.0 extension cable, the AXAGON ADR-205. The USB repeater cable amplifies the USB signal, allowing you to connect a USB device much further away than the usual 5 metres possible with passive cables. You can also connect several repeater cables in a series. A major advantage of the ADR-205 extension is its integrated connector for auxiliary power. In most cases, power from the USB bus is sufficient, but for devices with higher power consumption over longer distances, USB power may be inadequate. Auxiliary mains power can solve this problem. The exceptionally compact body of the AXAGON repeater allows for seamless use in electrical trunking or cable management systems. The use of a high-quality shielded cable guarantees high-speed communication and minimal unwanted interference.
Input:
- USB 2.0 for connecting to a computer
- USB Type-A (M) male connector
Output:
- USB 2.0 for connecting a remote USB device
- USB Type-A (F) female connector
- Transfer speed 480 / 12 / 1.5 Mbit/s (high / full / low speed)
Power:
- Power for the cable and connected devices is supplied via the USB bus (bus-power mode 5V–500mA).
- For most connected USB devices, power from the USB bus is sufficient and no additional power is needed.
- The active part of the cable includes a connector (Ø 3.5 × 1.3mm outer × inner diameter) for additional external power of 5V/1–2A.
- A 1.2m long USB A-M / 3.5mm jack power cable is included in the package. The cable allows for powering from a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16.
- When powering the repeater cable with a power adapter, you can also connect an external 2.5" drive without needing a separate power supply for the drive.
- For longer USB routes with several repeater cables connected in series, the power from the USB bus may be insufficient even for USB devices with lower power consumption than an external 2.5" drive. In this case, boosting the power by connecting a power adapter can also help.
Other features:
- Fully compatible with USB 2.0 and backward compatible with USB 1.1.
- Full Plug and Play and Hot Plug support.
- Two LEDs indicate power connection and USB device connection.
- A standard passive USB cable can also be used after the active USB cable.
- Dimensions of the active part are 56 × 22 × 14mm, cable length 5m.
- Weight 170g.
Supported operating systems:
- MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 and later (all 32- and 64-bit versions of Windows OS supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher.
- Note: Drivers are included with the supported operating systems and are installed automatically. No other drivers need to be installed and none are available.
Package contents:
- USB 2.0 A-M > A-F active extension cable, length 5m,
- USB-A / 3.5mm power cable,
- printed multilingual manual.
Specifications
Use
Male connectors
Connector
Type and number of connectors
Standards
Cable construction
Features
| Code: | AG200a23a |
| Warranty: | 36 months |
| Links: | Producer's Website: |
| Manufacturer information |
RealQ s.r.o. Železná 663/5 619 00 Brno Česká republika https://www.axagon.eu/cs/contact 
|