AVACOM for SONY BP-L60 Li-ion 14.4V 9200mAh 132Wh
AVACOM for SONY BP-L60 Li-ion 14.4V 9200mAh 132Wh
AVACOM battery for digital video camcorders made from high quality components
The AVACOM camcorder battery contains only high-quality components that have high performance and long service life. The battery is equipped with gold-plated connectors and the latest control electronics to prevent oxidation and ensure optimum current flow. They also contain a number of safety features to prevent overcharging, overheating, reverse charging and short-circuiting. An AVACOM battery is not just a good replacement for your original battery, but generally offers greater capacity (and therefore longer life) than the original battery.
How to keep the battery in good condition
The battery is partially charged at the factory but its capacity and performance are initially below 100% so you should fully charge it before use. To extend the life-span of the battery, it is recommended that you repeat the charge and discharge cycle at least 3 times at the beginning. Battery capacity reduces when left permanently plugged-in to the power supply, so it is recommended that you disconnect the device from time to time. If the battery is not in use, store it fully charged in a dry place and charge it at least once in 6 months.
What damages the battery
One of the most common causes of battery degradation is when you completely discharge it and do not use it for a long time. Do not expose the battery to temperatures above 60°C. If the battery is exposed to temperatures below 5°C, charge it only after it has returned to room temperature. Only use the battery in the devices for which it is intended, be careful that it is not subject to a short circuit or too-high discharge current, and protect it from mechanical damage, chemical agents and moisture.
Parameters and Specifications:
Intended for:
Sony, Idx
Battery replacement:
IDX: E-50S, E-7S
SONY: BP-65H, BP-90, BP-GL65, BP-GL95, BP-L75, BP-L40, BP-L40, BP- BP-L90A
Type:
Li-Ion
Capacity:
9200mAh
132Wh
Output voltage:
14.4V
Specifications
Features
| Code: | IB915 |
| Links: | Producer's Website: |
| Manufacturer information |
AVACOM s.r.o., Ocelářská 659/5, 190 00 Praha 9, +420284021953, [email protected] 
|