Ajax SideButton (one-button - two-way) [55] white - Side button (shift switch 1, 6)

LightSwitch Jeweller is an intelligent touch wall switch designed for indoor installation. LightSwitch can replace any mechanical or touch switch: The product line includes 1,5 (chandelier) and 6 (staircase) switches. LightSwitch is installed without changing the wiring of the building. The device does not require a neutral conductor - a phase conductor is sufficient. The switch operates in two modes: pulsed or bistable. The LightSwitch can control lighting devices from 5 to 600 W. For low wattage bulbs, the kit includes a capacitor that connects in parallel to the lighting fixture.

Great user experience

LightSwitch has a large touch button that activates when your palm comes within 15 mm of the button. The device can thus be used as a solution for public places: You can operate the lighting with dirty wet hands or even in gloves. LightSwitch has a backlight that makes the switch visible even in the dark. The device can also be safely placed next to the bed and its soft backlighting will not disturb. The backlight can be turned off completely in Ajax if required. LightSwitch allows you to control the light remotely via Ajax applications: right from the sofa or even from abroad. There are also scenarios for automating routine actions. The light can be set to illuminate when an alarm occurs, according to a timetable, when the alarm system is deactivated or after a set time has elapsed (pulse mode). Installers can also configure automation device actions by pressing the LightSwitch button. For example, for room darkening, the relay activates the shutters to close. Supported types of automation scenarios: during an alarm, when the system status changes, according to the time schedule, after pressing the touch button.

Excellent communication

Jeweler is a radio protocol that provides fast and reliable two-way communication between the hub and connected devices. The protocol provides a wireless radio communication range of up to 1100 m, allowing switches to be installed not only in apartments and houses, but also in large open spaces or warehouses. Jeweller transmits all necessary information and provides instant control over any number of LightSwitch devices in the system. With Jeweller, users can always control lighting and see the current status of switches in Ajax applications. All the installer needs to install the LightSwitch is two screwdrivers. The device connects to the Ajax security system in less than one minute. You simply need to open the Ajax app, scan the QR code and add the device to the room and security group.

Colour:
white

Warning:
Using the device requires a connection to the Ajax Hub. The LightSwitch in this case as a combination switch consists of 2, 3, 4 or 5 relays, touch buttons (in eight different colours) and a frame with the corresponding number of holes.